Skip to content
Lerdge Official Store
Filament Detection Sensor
Filament Detection Sensor
Regular price
$0.98 USD
Regular price
Sale price
$0.98 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
LERDGE 3D Printer Part Material detection module for Lerdge Board
1.75mm filament.
Product name: Material detection module
Shipping list:
Material detection module with cable* 1set
Sizes for option: 1.75mm.
Features: Wear-resistant copper sets added in both the inlet and outlet to effectively extend the product life.
Note: Currently only black Material detection module as version 2.0Dimensions drawing:
Used with Lerdge board:
When there is material in, the green light in the module keeps lighting. And when the material is exhausted, the green light goes off, then the motherboard executes the pause command operation, after the replacement of the material, can continue to print.
Wiring: Connect the module to the M-sensor port on the motherboard.
Used with other motherboards:
The material detection module uses the level transition detection method. When with material in, the detection level signal should be high, and when no material, the material port level signal goes low. When the system detects a determined transition from high to low level, it will regard it as the material exhausted, then the board executes the pause command operation, and after the replacement of the material, it will continue to print.
