Skip to content
Motherboard
by Shopify API
Many guys design and build their own printers with Lerdge motherboards, and another guys use Lerdge motherboards to replace their original printer motherboards. Either way, when most people purchase a motherboard, they will also be equipped with accessories such as Power Monitoring Module, Hotbed High-power Module, Online and Wifi Module, Endstop, Filament Detection Sensor, etc. Based on this case, we collect the above necessary components into a package, it not only saves your time to choose, but also its price have a big discount of $10 to $40 than purchasing them separately!
The comparison between Lerdge Z and Lerdge K, Lerdge X is as follows:
| Table header 0 | Lerdge X | Lerdge Z (Recommend) | Lerdge K |
|---|---|---|---|
| Status | Suspend Sales | Released | upgrade |
| Size | 70*90mm | 70*110mm | 90*140mm |
| CPU | STM32F407VET-168MHz | STM32F407VET-168MHz | STM32F407ZGT-168MHz |
| Supply Voltage | 10~28V | 10~28V | 10~30V |
| Movement Structure | XYZ, CoreXY, CoreXZ, Delta | XYZ, CoreXY, CoreXZ, Delta | XYZ, CoreXY, CoreXZ, Delta |
| Motor Driver Axis | X, Y, Z, E0 | X, Y, Z, E0, Ex, and Ex2 (Ex2 needs extension module) | X, Y, Z, E0, Ex, Ex2 |
| Ex Axis Can Be Used As | Unsupport | X, Y, Z, E0, E1 | X, Y, Z, E0, E1 |
| Ex2 Axis Can Be Used As | Unsupport | X, Y, Z, E0, E1, E2 (needs extension module) | Unsupport |
| Driver frequency | 160KHZ | 180KHz | 180KHz |
| TMC Dirver UARNT mode | Unsupport | Unsupport | Support |
| TMC Dirver SPI mode | Unsupport | Unsupport | Support |
| Endstop | X,Y,Z-Axis Single Limit | X,Y,Z-Axis Single Limit | X,Y,Z-Axis Single Limit |
| Hothead Thermometer Type | NTC100K | NTC100K | NTC100K / PT100 |
| Hothead Temperature Range | 0~260℃ | 0~280℃ | 0~260℃ / 0~500℃ |
| Hotbed Thermometer Type | NTC100K (by expansion module) | NTC100K | NTC100K |
| Hotbed Temperature Range | 0~120℃ (by expansion module） | 0~120℃ | 0~120℃ |
| LED Interface | LED strips | LED strips | LED and RGB strips |
| LED Status Indication | Unsupport | Support | Unsupport |
| Auto Heat Dissipation of Driver | Unsupport | Support | Support |
| Print Mode | Only support three printing models:
√ Dingle-extrusion single-hothead. | Support two printing models, include :
√ Double-extrusion single-hothead,; √ Dingle-extrusion single-hothead. One printing models can be added by the expansion module: √ Three-extruders and single-hothead | Support three printing models, include :
√ Double-extrusion double-hothead; √ Double-extrusion single-hothead,; √ Dingle-extrusion single-hothead. |
| Auto Heat Dissipation of HotHead | √ One interface | √ One interface (Normal);
√ Two interface (by the expansion module) | √ Two interface |
| Heat Dissipation of Model | √ One interface | √ One interface (Normal);
√ Two interface (by the expansion module) | √ Two interface |
| Filament Runout Detection | √ Two interface | √ One interface (Normal);
√ Two interface (by the expansion module) | √ Two interface |
Recommend
Lerdge Modules
Hotend
